Gmic download

G'MIC - GREYC's Magic for Image Computing: A Full-Featured Open-Source Framework for Image Processing - MainA full-featured open-source framework for processing generic image (2D,3D,3D+t) with multiple interfaces: command-line (cli), gimp plug-in, web service, Qt plug...macで使えるかなーと前半は、インストール失敗パターンです^^;$ sudo pip install gmicWARNING: The directory '/Users/junichi/Library/Caches/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.Collecting gmic Downloading gmic-0.0.2.tar.gz (1.3 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 2.7 MB/s eta 0:00:00 Preparing metadata (setup.py) ... doneUsing legacy 'setup.py install' for gmic, since package 'wheel' is not installed.Installing collected packages: gmic Running setup.py install for gmic ... error error: subprocess-exited-with-error × Running setup.py install for gmic did not run successfully. │ exit code: 1 ╰─> [20 lines of output] running install running build running build_py file gmic.py (for module gmic) not found file gmic.py (for module gmic) not found running build_ext building 'gmic' extension creating build creating build/temp.macosx-12.5-x86_64-3.9 creating build/temp.macosx-12.5-x86_64-3.9/src creating build/temp.macosx-12.5-x86_64-3.9/src/gmic creating build/temp.macosx-12.5-x86_64-3.9/src/gmic/src clang -Wno-unused-result -Wsign-compare -Wunreachable-code -DNDEBUG -g -fwrapv -O3 -Wall -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include -Dgmic_build -Dcimg_use_png -Dcimg_date="" -Dcimg_time="" -Dgmic_is_parallel -Dcimg_use_zlib -Dcimg_display=1 -I. -Isrc/gmic/src -I/Users/junichi/.pyenv/versions/3.9.10/include/python3.9 -c gmicpy.cpp -o build/temp.macosx-12.5-x86_64-3.9/gmicpy.o -std=c++11 In file included from gmicpy.cpp:3: In file included from src/gmic/src/gmic.h:193: src/gmic/src/./CImg.h:386:10: fatal error: 'X11/Xlib.h' file not found #include ^~~~~~~~~~~~ 1 error generated. error: command '/usr/bin/clang' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip.error: legacy-install-failureとりあえず mkdir ~/Library/Application\ Support/GIMP/2.10/plug-insGIMPを起動すると新規プラグイン問い合わせ中となってるので待ってみる。cp -a ./Applications ../plugins-fixed/./ApplicationsこんなのがCPUを使っていますが・・・とりあえず待ちましょう一応 xcodebuildとかたまに動いているのでビルドしているのでしょうか・・・？？？わかりません。とりあえず待ちます。なんか一生終わらないので消しました。失敗^^;;目次こちらが正解でした！手動でgmic_gimp_qtを実行して、dylibを順番に許可します。フィルター ＞ G’MIC-Qt 現る！GMIC コマンドラインgmicをportで入れます。こちらが正解でした！ 79.5 MB30 Sep 2019こちらをダウンロードしてcd $HOME/Library/Application Support/GIMP/2.10/plug-instar xf PATH_TO_PLUGIN_ARCHIVE/PLUGIN.tgz作ったplug-insディレクトリに移動して 、ダウンロードした GMIC-Gimp-2.10-osx.tgz を展開して$pwd~/Library/Application Support/GIMP/2.10/plug-ins$ tar xf ~/Downloads/GMIC-Gimp-2.10-osx.tgz $ ls -ltotal 15096drwxr-xr-x@ 5 junichi staff 160 9 30 2019 GMIC-rwxr-xr-x@ 1 junichi staff 7725332 9 30 2019 gmic_gimp_qtqtとGMICがある状態です。これは正解のようです。GIMPを開くとこんな感じなので、一度手動で開いてみます。で開いて、なんかエラーで終わりました。次は、GIMPを開きます。なんか、一つ前のcpが続くのを適当に終わったので libX11.6.dylib?みたいなのが壊れたようです。。。GIMPを入れ直します。。。GIMP 2.10.32をダウンロードしました。違いました、ここに入っている libX11.6.dylibが壊れているようです。。。ln -s

View unanswered posts | View active topics Author Message Post subject: Partha's new 2.9 build with high bit-depth GMICPosted: Mon Sep 14, 2015 7:16 am (#1) GimpChat Member Joined: Jul 11, 2010Posts: 349 Partha has just released a new windows build of GIMP 2.9 with the GMIC compiled for high bit depth. It has an installer and a portable version. This is good news for anyone that has wants to try the new GMIC but has been unable to compile it for windows. Top dinasset Post subject: Re: Partha's new 2.9 build with high bit-depth GMICPosted: Mon Sep 14, 2015 11:33 am (#2) Joined: Jan 20, 2013Posts: 14816Location: roma, italy downloaded the portable version and updated gmic-gimp to 1.6.5.0 (the version included in the gimp package was 1.6.4.1)so far so good one question: where should I put in a portable version the file containing the personal gmic filters? in the installed version they go into .../AppData/user.gimpbut with the portable where does gmic look into?thanksedit: still there but with the previous name gmic, not the recent one user.gmic _________________"Where am I ?" Last edited by dinasset on Tue Sep 15, 2015 8:57 am, edited 1 time in total. Top 2-ton Post subject: Re: Partha's new 2.9 build with high bit-depth GMICPosted: Mon Sep 14, 2015 1:54 pm (#3) Joined: Apr 08, 2010Posts: 5420Location: Northwest Ohio Anxious for the mcgimp to lose the 'experimental' tag!!! Top Deblk Post subject: Re: Partha's new 2.9 build with high bit-depth GMICPosted: Tue Sep 15, 2015 1:41 am (#4) Joined: Dec 22, 2011Posts: 399 Excellent...thanks Partha. When does 2.9 become official? _________________ Top dinasset Post subject: Re: Partha's new 2.9 build with high bit-depth GMICPosted: Tue Sep 15, 2015 9:02 am (#5) Joined: Jan 20, 2013Posts: 14816Location: roma, italy I did my first experiments and I got a surprise:- create a new image- fill it with whichever gradient (better strongly coloured)- rescale the image one, two, three times...- at each rescale colours tend to vanishBUT if I select 64bits gamma when creating the new image then colours persistdoes this mean that ONLY 64bits images may be manipulated in this version? _________________"Where am I ?" Top dinasset Post subject: Re: Partha's new 2.9 build with high bit-depth GMICPosted: Wed Sep 16, 2015 2:50 am (#6) Joined: Jan 20, 2013Posts: 14816Location: roma, italy if someone likes to make a test on the Windows 64bits portable version (no risk, after the test the folder created can be thrown away without any trace left back):1-download from Partha the Windows 64 the portable experimental Partha edition for Gimp 2.9 64bits2-double click on the downloaded zip (it's self installing) specifying where to put the extracted folder (in my case I specified Deesktop)3-open the created folder4-execute the gimprun-2.9.exe5-now open any image you like6-go to Filters>G'mic: which version of G'mic do you see? pls post7-do an image rescale (any size except the original one, because in that case rescale is not performed)8-look at the colours: do you notice any change?in my test I saw

Mihvel wrote:I'm playing a bit with the BIMP Plug In and it can do batch with all steps from the algorithm except layer manipulation, or I can't get it how to do it.Does anybody know hop to duplicate a layer and change the layer mode using BIMP?Using ScanTailor? Could be Linux or Windows. Easier in linux where at least there are a few tools.Using gmic_gimp and BIMP in linuxDavid provides (provided, I think it has been updated) a script that BIMP will pick up. The old one which I use is called gmic_shell.scm where you can enter one or more gmic commands. There is one here: gmic_in_script.scm Never used that one, so this example using the old script.Picked this example off the internet, obviously all depends on the actual images. (EDIT: Only just seen your muxed imgur ref: but not repeating with new image) Using gmic_gimp_qt & Gimp 2.8.22 there is a filter Repair scanned document The important bits here are the new image and Very verbose (log file) settings. You need the settings to input into the script.You are not stuck with one command, choose another filter and same rules apply. Write the settings to the log file. Now for the editing bit: In linux the gmic folder is in ~/.config/gmic Windows is in user/Appdata/Roaming somewhere.Copy the output from the log file into the script according to the example and save it ... kNnxMw.jpgPop the script into your Gimp profile scripts folder. You can check the action on an open file, the script shows bottom of the Filters menu along with gmic.but using BIMP: Only one action required, Other Gimp Procedure -> gmic-shell. Add your files, set an output. Very slow, go for a long walk while it works. the old gmic_shell.scm script as an exampleFor Gmic see www.gmic.eu

/opt/X11/lib/libX11.6.dylib ~/Library/Application Support/GIMP/2.10/Frameworks/X11がない場合は、 XQuartzをインストールすると良いようです。 も壊れていると言われるので ダウンロードして Frameworksに置きました。他のdylibも全部検証できませんになります！手動でgmic_gimp_qtを実行して、dylibを順番に許可します。ゴミ箱 or キャンセルで、「キャンセル」を選択すると直後に「プライバシーとセキュリティ」＞一般 で以下のように許可ボタンが表示されます。すべて許可にできると！gmic_gimp_qtを実行後に GIMPで実行しなよーと言われます…知ってますよーとplug-ins/gmic_gimp_qt is a GIMP plug-in and must be run by GIMP to be usedでGIMPで実行すると！フィルター ＞ G’MIC-Qt 現る！しかし、まだ終わりません。これを実行すると、またdylibなど「検証できません」を連発します。同じく、セキュリティーとプライバシー ＞ 一般、で許可します。これも繰り返します。↑フィルムエミュレーションはエラーになりました。えぐい。。。Colors > Simulate Film > Fuji Xtrans III がフジフィルムのフィルムシュミレーションをいくつか選択できます。他のカテゴリーも白黒、インスタント、ネガ、プリント、スライド、とエグいです。このフィルターだけで。。。百万年遊べます^^;;;やばい。GMIC コマンドラインG'MIC - GREYC's Magic for Image Computing: A Full-Featured Open-Source Framework for Image Processing - Table of ContentsA full-featured open-source framework for processing generic image (2D,3D,3D+t) with multiple interfaces: command-line (cli), gimp plug-in, web service, Qt plug...$pip install gmic==2.9.2ERROR: Could not find a version that satisfies the requirement gmic==2.9.2 (from versions: 0.0.1, 0.0.2, 2.8.0.dev1, 2.8.0.dev4, 2.8.1.dev0, 2.8.1.dev1, 2.8.1.dev2, 2.8.1.dev3, 2.8.1.dev5, 2.8.1.dev6, 2.8.1.dev7)ERROR: No matching distribution found for gmic==2.9.22.9.2はないと言われ、2.8.1.dev７を入れてみるとModuleNotFoundError: No module named ‘pkgconfig’$ pip install pkgconfigCollecting pkgconfig Downloading pkgconfig-1.5.5-py3-none-any.whl (6.7 kB)Installing collected packages: pkgconfigSuccessfully installed pkgconfig-1.5.5clang: error: unsupported option ‘-fopenmp’---とりあえず上手く行かないのでおわり^^; macのバージョンに対応していないのかlinuxに入れて動かしてみます。また後ほどpythonである必要はないので、gmicをportで入れます。$ sudo port selfupdate---> Updating MacPorts base sources using rsyncMacPorts base version 2.7.1 installed,MacPorts base version 2.7.2 downloaded.---> Updating the ports tree$ sudo port install gmicにょろにょろ---> Scanning binaries for linking errors---> No broken files found.---> No broken ports found.---> Some of the ports you installed have notes: ffmpeg has the following notes: This build of ffmpeg includes GPLed code and is therefore licensed under GPL v2 or later. The following modules are GPLed: postproc libvidstab libx264 libx265 libxvid To include all nonfree, GPLed and LGPL code use variant +nonfree. To remove nonfree and GPLed code leaving only LGPL code remove the +gpl2 variant. libpsl has the following notes: libpsl API documentation is provided by the port 'libpsl-docs'. python310 has the following notes: To make this the default Python or Python 3 (i.e., the version run by the 'python' or 'python3' commands), run one or both of: sudo port select --set python python310 sudo port select --set python3 python310$ gmic version gmic: GREYC's Magic for Image Computing: command-line interface Version 3.1.6 ( Copyright (c) Since

Gmic-8bfA filter plug-in for Adobe® Photoshop®* and other compatible software that interacts with G'MIC-Qt.The latest version can be downloaded from the Releases tab.System RequirementsWindows* 7, 8, 10 or 11.A compatible 32-bit (x86) or 64-bit (x64 or ARM64) host application.InstallationClose your host application.Place GmicPlugin.8bf and gmic folder in the folder that your host application searches for filter plug-ins.Restart your host application.The plug-in will now be available as the G'MIC-Qt menu item in the GMIC category.Installing in Specific HostsThe gmic-8bf project wiki provides installation instructions for several popular hosts.Affinity Photo: Installing in Affinity PhotoPhotoshop: Installing in PhotoshopXnView: Installing in XnViewUpdatingFollow the installation instructions above and allow any existing files to be replaced.UsageTo start the plug-in select the G'MIC-Qt item in the filter list of your host application.The following image shows the menu location in Adobe Photoshop.G'MIC-QtWhen the G'MIC-Qt menu item is clicked it will start the G'MIC-Qt user interface.While the plug-in supports the Grayscale image modes, many G'MIC effects will only work correctly in the RGB image modes(e.g. the various Colorize effects).You can "layer" multiple G'MIC effects in a single session by clicking the Apply button.Note that only the most recently applied effect will be used when the plug-in is invokedthrough the "Last Filter" or "Repeat Filter" commands.Filters that require multiple input images can only be used if the input settings have been configured to provide asecond input image or the document has multiple layers and the host supports providing layers to the plug-in.Document layers are provided to plug-ins by Adobe Photoshop CS (8.0) and later (and possibly other Adobe applications), but 3rd-partyhosts will most likely not support this feature due to the license restrictions added to the Photoshop SDK after version 6.0.If the user has not configured a default output folder the plug-in will prompt the user to save the modified images after theG'MIC-Qt dialog has been closed in the following cases:When a filter produces multiple output images the plug-in will prompt the user for a folder to copy them into.When a filter changes the image size the plug-in will prompt the user to save the resized image.Color ManagementThe G'MIC-Qt preview

5:17 am (#7) Joined: Dec 19, 2017Posts: 88Location: France I've some troubles...I'm a Linux user for all my "works" on graphics and design. I really love using GIMP, Blender, Inkscape and Krita, on Linux.For me, GIMP is a reference software for open source systems.I can't find any way to install the 2.10.18 version on Linux Mint.On Linux Mint 19, the base package is GIMP 2.8 Otto's PPA is GIMP 2.10.14No Appimage yet.Flatpak version excludes using GMIC (or I don't found how to do).Windows users can use 2.10.18 yet.It's not .... _________________KF-GFX.FR Top ofnuts Post subject: Re: 2.10.18 is out!Posted: Thu Feb 27, 2020 7:55 am (#8) Joined: Oct 25, 2010Posts: 4797 Krol wrote:I've some troubles...I'm a Linux user for all my "works" on graphics and design. I really love using GIMP, Blender, Inkscape and Krita, on Linux.For me, GIMP is a reference software for open source systems.I can't find any way to install the 2.10.18 version on Linux Mint.On Linux Mint 19, the base package is GIMP 2.8 Otto's PPA is GIMP 2.10.14No Appimage yet.Flatpak version excludes using GMIC (or I don't found how to do).Windows users can use 2.10.18 yet.It's not ....Why the hurry? I upgrade after maybe a month, when all the bugs have been ironed out... The PPA is perhaps waiting for a stable version... All the better for you. _________________ Top Krol Post subject: Re: 2.10.18 is out!Posted: Thu Feb 27, 2020 9:55 am (#9) Joined: Dec 19, 2017Posts: 88Location: France ofnuts wrote:Why the hurry ?'cause