Common problems with taylor guitars

1. Are Taylor Guitars Good?1.1 My Personal Experience With Taylors – What is So Special About Taylor Guitars?2. What’s Good About Taylor Guitars?2.1 Tonewoods2.2 Playability3. What’s Not-so-Good About Taylor Guitars?4. Features of Taylor Guitars5. FAQs5.1 Why Are Taylor Guitars So Expensive?5.2 Are Taylor Guitars Overpriced?5.3 Are Taylors Good for Fingerpicking?5.4 Are Taylor Guitars Good for Beginners?5.5 Are Taylor Guitars Hard to Play?5.6 Is Taylor Better Than Martin?5.7 Is Taylor or Gibson Better?5.8 Do Taylor Guitars Have A Lifetime Warranty?6. ConclusionWhether you’ve heard of Taylor or not, considering one for your next guitar is a big step. They are one of the most popular acoustic guitar makers in the business. They may not have centuries of guitar making under their belts (like Martin guitars), but they have made a major impact on the music industry with their high-quality, great-sounding, and incredibly playable guitars. Taylor started off as a business venture by Bob Taylor and Kurt Listug in El Cajon, California, in 1974. Taylor and Listug met while working at a music store in San Diego and later purchased the store when the previous owner sold it. Bob Taylor was only 19 years old at the time! The young Taylor and Listug were determined to make a living doing what they loved, and they loved guitars. Today, Taylor has 2 factories (El Cajon, CA, and Tecate, Mexico) and employs over 1,200 people. Not bad for a couple of young guys who decided to start a guitar company.Taylor’s innovation in the art of guitar making is one of the main reasons for their success.Taylor uses high-tech machines to make their guitars, such as computer mills and lasers. They brought a new, modern method of guitar manufacturing to the table which allows them to make guitars with amazing consistency. In other words, the tone won’t vary much between different Taylor guitars. Taylor has also come up with some new tonal improvements to the acoustic guitar, such as their V-Class bracing. This bracing technique allows the guitar to resonate more freely resulting in an increased response. From a tonal perspective, Taylor guitars just sound right. Let’s take a look at some other factors that make Taylor guitars some of the best instruments in the world. Check our other Taylor Guides:–5 Best Taylor Guitars–How to Choose The Right Taylor Guitar for You?–Are Taylor Guitars Good For Beginners?–Where Are Taylor Guitars Made?Yes, Taylor guitars are very good guitars. As a matter of fact, they are amazing guitars. Taylor uses high-tech equipment to craft guitars from both solid wood and layered wood. Their playability and sound are what makes them one of the best guitar manufacturers in the world. Let’s take a more in-depth look…My Personal Experience With

Guitars for fingerpicking. Their smaller-bodied models are voiced well for fingerpicking in general. Taylor’s focused tone works well for fingerpicking styles because there is not a lot of overtones that can often over-color the sound. Their necks are also good for chording all over the neck. This is essential for fingerstyle playing because of the amount of chording that is so often required. It isn’t too big or too small. Are Taylor Guitars Good for Beginners?Yes, Taylor guitars are good for beginners. This is because they have models that are priced conservatively enough for a lot of beginners, and because they are such amazing players. The playability of Taylor guitars is effortless thus making learning incredibly easy. Beginners will also appreciate professional features, such as electronics, that they will be able to use as they progress. You will never outgrow a Taylor guitar! Learn more from this article of ours: “Are Taylor Guitars Good For Beginners?“.Are Taylor Guitars Hard to Play?Taylor makes some of the easiest guitars to play. Their playability is absolutely incredible! In fact, their playability is one of the main reasons a lot of guitarists gravitate to them in the first place. Is Taylor Better Than Martin?Both companies have their strengths and weaknesses. Taylor is better at constructing guitars with laminated woods than Martin. However, Martin makes guitars that sound warmer than most Taylors. Martin’s also tend to have more volume (from my experience). The thing to keep in mind is that Taylor guitars follow a more modern approach while Martin tends to stick to traditional construction concepts. If you want a more modern acoustic guitar, go with a Taylor. Is Taylor or Gibson Better?Again, both companies have their strong points. Gibson acoustic guitars tends to be a bit more traditional than Taylor. Taylor guitars are for players who want a more modern acoustic guitar. Both companies use high-quality materials and have amazing tone. Taylor might be slightly more playable and certainly more consistent than Gibson. Do Taylor Guitars Have A Lifetime Warranty?Yes, Taylor guitars have a lifetime warranty. Basically, if it broke because of a manufacturing defect, they will repair or replace your guitar. ConclusionPerhaps there is no other industry in the world that seems to be so stuck in tradition as the guitar industry. Both players and manufacturers tend to have the mindset that, “if it isn’t broken, don’t fix it.” This is where companies like Taylor step in and say, “Wait a minute…We have technology, so let’s use it to make a better guitar.” The industry needs that mentality. After all, we live in an age where technology consumes nearly every aspect of our lives. While tradition will forever be present, it is time

With a veneer on each side. This allows Taylor to use their resources more responsibly while providing a beautiful-looking instrument. PlayabilityThe best part about a Taylor has to be the incredible playability. This is the result of years of guitar design research which has led to new design and manufacturing procedures. In other words: there aren’t many guitars on the market that can rival Taylor in terms of playability. Classic C neck shape. Check our full guitar neck shape guide here.The action is smooth, and the C-shaped neck profile will fit hands of all sizes. Grabbing a solid chord anywhere on the neck is comfortable. Wherever your fingers land, there seems to be a note there. Taylor makes guitars that you just want to play all day long. You’ll find yourself reaching for a Taylor more often than you will other guitars in your collection just because they play so well. I could go on and on about how great they play, but you really need to try one for yourself to see what I mean. What’s Not-so-Good About Taylor Guitars?To many guitarists, an acoustic guitar isn’t a “real” guitar unless it is made of solid wood. That is far from the truth, but it does raise the question: Why is layered (laminate) wood bad?First, it is stiffer and more durable than solid wood which is both a blessing and a curse. Sure, it’s more durable and not as prone to warpage as solid wood, but stiffer also means less resonance. For this reason, Taylor guitars that are made from layered tonewoods are simply not as tonally complex as those made with all solid wood. The tone is very focused and lacks the depth that only solid tonewoods provide. I have also found that Taylor guitars made of layered tonewoods often lack natural volume and require a heavier picking hand to really make them sing. This is mainly a complaint on larger-bodied models such as the dreadnought. Compared to solid wood guitars, they just don’t have the projection. Features of Taylor GuitarsAll Taylor guitars offer superb playability. That’s pretty much a guarantee. But let’s take a closer look at some features of some popular models to find out what makes them so great.For the first example, we’ll take a look at a Taylor 214ce. The Taylor 214ce is made with a solid Sitka spruce top and layered rosewood back and sides. This produces a warm, focused tone that offers a lot of projection from a guitar with a Grand Auditorium body style. Taylor 214ceThe layered rosewood back and sides are incredibly striking to look at. This is because a veneer is used in place of the natural wood grain, and

Taylors – What is So Special About Taylor Guitars?The first Taylor that I ever played was a 2007 Taylor 214. I was in a music shop in Winston-Salem, NC before a concert and decided to play a few guitars while I was there. I had been hearing a buzz about Taylor guitars since I had started playing but for some reason, I had never played one until that day. I spotted what I believe was a Grand Auditorium-sized guitar hanging on the wall and decided that I would give it a go. It was a fairly ordinary-looking guitar but it was appealing to me because of the body size. The clerk got the guitar off of the wall for me and I sat down with it on a nearby stool. I remember picking it with my fingers and being surprised by the amount of volume it had for a smaller guitar. Then, I chorded it. I was sold from that point. The playability was unlike anything I had experienced in an acoustic at that time. It just felt natural in my hand.I didn’t have to “fight” to play it. Wherever my fingers landed, there was a note there that required little effort to coax out of it. The sound was focused, clear, and well-balanced. Was it as rich and colorful as a Martin D-28? No. But it was far from being bland and boring.I didn’t know that the guitar was made of layered wood (laminate) when I picked it up. The clerk made a comment about how they were not real wood, and it surprised me. I had played some laminate guitars before, but they did not have the playability and tone of the Taylor. This forever changed my opinion of laminate guitars. They could sound and play amazingly after all. Sadly, I didn’t end up taking that guitar home with me that day. It would be years before I would own a Taylor guitar, but I never forgot how well that 214 played. I tried to set up my other guitars to play like a Taylor, but alas, it wasn’t the same. I finally got one for myself around 2017 – a Taylor 214 similar to the one I had played in that music store around ten years before. I’ve never used a Taylor on a heavy tour, but I have used it in the recording studio. It was by far my favorite guitar to record with because of its focused projection and clarity. The Taylor just sounded right on all of my recordings compared to my other acoustics. So would I buy another Taylor? Absolutely! In fact, it is next on my wish list. Now, if I can

No matter how great a guitar sounds or looks, or how much it costs for that matter, if it doesn’t “feel right” you’re going to be disappointed, most likely sooner rather than later. I have certainly had this experience. One of the risks of buying a guitar without playing it – something quite common these days with the advent of internet sales – is that the neck width and shape will just not work for you. I’ve bought and quickly sold many a guitar that was great in every other way but I just couldn’t bond with it because it was just too uncomfortable to play. Here are some basics about widths and shapes that I hope will help a buyer make at least an educated guess about comfort and play-ability when buying a guitar without playing it first. The first consideration is nut width. The two most common nut widths are 1 11/16” and 1 ¾” on steel string guitars. You wouldn’t think that only 1/16” difference would make all that much difference but it truly does. For better than 150 years, Martin guitars were made with nuts that measured 1 11/16” (with a few early exceptions) and even today most standard Martin models come through with that nut width. Things are changing a bit at this venerable company however – about two years ago they began building their classic D-18 with a 1 ¾” nut and many of the limited edition models come with nuts at that width. Likewise, the vast majority of the “boutique” makers use 1 ¾” as their standard nut width. Taylor guitars started with the 1 11/16” nut width but quickly went over to 1 ¾” combined with a very shallow, almost flat neck profile (more on that in the next installment) for the vast majority of their guitars. Gibson acoustics mostly have 1 11/16” nuts but some, especially their modern jumbo size instruments show a width that is just a hair wider, perhaps 1 23/32”. Some imported guitars are narrower at the nut, similar to many electric guitars, with a measurement of just 1 5/8” – in my opinion this is too narrow for many people on an acoustic guitar, which of course uses strings that are heavier and wider than those used on an electric in most cases. In the other direction, some steel string guitars (12-strings in particular) have nut widths of 1 7/8” or even slightly wider. This is necessary to facilitate fingering of the doubled up strings on a 12-string. On nylon string guitars the standard measurements are usually given in millimeters. The two most common on pure classical guitars are 50mm and 52mm. Wider necks are common on