AVEVA Engineering 14 1 SP1

Training Guide TM-3652 AVEVA Engineering (14.2) Administration 1 AVEVA Engineering (14.2) Engineering Administration (TM-3652) This page is intentionally left blank. Copyright © 2014 AVEVA Solutions Limited and its subsidiaries. All rights reserved. 2 www.aveva.com AVEVA Engineering (14.2) Engineering Administration (TM-3652) Revision Log Date Revision Description of Revision Approved for Training 14.1 09/06/2014 1.0 18/06/2015 2.0 Approved for Training 14.1.SP1 07/03/2017 3.0 Approved for Training 14.2. Author Reviewed Approved HU / KI JB GC HU / KI JB GC KI / GC / AJ KI, GC GC Updates Change highlighting will be employed for all revisions. Where new or changed information is presented section headings will be highlighted in Turquoise. Suggestion / Problems If you have a suggestion about this manual or the system to which it refers please report it to AVEVA Training & Product Support at [email protected] This manual provides documentation relating to products to which you may not have access or which may not be licensed to you. For further information on which products are licensed to you please refer to your licence conditions. Visit our website at Disclaimer 1.1 AVEVA does not warrant that the use of the AVEVA software will be uninterrupted, error-free or free from viruses. 1.2 AVEVA shall not be liable for: loss of profits; loss of business; depletion of goodwill and/or similar losses; loss of anticipated savings; loss of goods; loss of contract; loss of use; loss or corruption of data or information; any special, indirect, consequential or pure economic loss, costs, damages, charges or expenses which may be suffered by the user, including any loss suffered by the user resulting from the inaccuracy or invalidity of any data created by the AVEVA software, irrespective of whether such losses are suffered directly or indirectly, or arise in contract, tort (including negligence) or otherwise. 1.3 AVEVA's total liability in contract, tort (including negligence), or otherwise, arising in connection with the performance of the AVEVA software shall be limited to 100% of the licence fees paid in the year in which the user's claim is brought. 1.4 Clauses 1.1 to 1.3 shall apply to

Interface is licensed from Microsoft Corporation by AVEVA and use of the Fluent trade mark is strictly forbidden All other trademarks belong to their respective owners and cannot be used without the permission of the owner. Copyright © 2014 AVEVA Solutions Limited and its subsidiaries. All rights reserved. 4 www.aveva.com CONTENTS 1 Introduction ............................................................................................................................ 9 Aim ...................................................................................................................................................... 9 Objectives .......................................................................................................................................... 9 Prerequisites...................................................................................................................................... 9 Course Structure ............................................................................................................................... 9 Using this guide ................................................................................................................................ 9 2 AVEVA Engineering Data Model .......................................................................................... 10 AVEVA Engineering Project Data Setup – Admin Module .......................................................... 12 2.1.1 Standard Project Data Setup ..................................................................................................... 13 AVEVA Engineering Data Setup – Lexicon/Configuration Module ............................................ 13 AVEVA Engineering Data Setup – AVEVA Engineering Application ......................................... 14 3 Standard Project Data Setup ............................................................................................... 15 Standard Project Data Definition in Admin Module ..................................................................... 15 3.1.1 Creating an Empty Project ......................................................................................................... 17 3.1.2 Create Discipline - A Worked Example ...................................................................................... 18 Exercise 1(a) – Standard Project Data Definitions – [Define Discipline] ................................. 23 3.1.3 Create Teams and Users ........................................................................................................... 24 Exercise 1(b) – Standard Project Data Definitions – [Teams & Users] .................................... 33 3.1.4 Create Databases and MDBs .................................................................................................... 34 Exercise 1 (c) – Standard Project Data Definitions – [Define Database] ................................. 38 Exercise 1 (d) – Standard Project Data Definitions – [Define MDB] ........................................ 42 4 Developing a Data Model in AVEVA Lexicon/Configuration.............................................. 45 Developing a Data Model in Lexicon/Configuration Module ...................................................... 45 Developing a Data Model from Scratch ........................................................................................ 46 4.2.1 Create BaseModel with Dabacon Definitions ............................................................................ 47 4.2.2 Create Engineering Class .......................................................................................................... 51 Exercise 2 – Create Engineering Class ..................................................................................... 57 4.2.3 Create Engineering Class Attributes .......................................................................................... 58 Exercise 3 – Create Engineering Class Attributes .................................................................... 70 4.2.4 Create Engineering Class Associations ..................................................................................... 71 Exercise 4 – Create Engineering Class Associations .............................................................. 78 4.2.5 Assign Discipline to Engineering Class Attributes ..................................................................... 79 Exercise 5 – Assign Discipline to Engineering Class Attributes ............................................. 82 4.2.6 Build the Model .......................................................................................................................... 83 Export and Import Conceptual Data Model .................................................................................. 89 4.3.1 Export Conceptual Data Model .................................................................................................. 89 4.3.2 Import Conceptual Data Model – A Worked Example ............................................................... 91 Exercise 6 – Import and Build

Torrent download Lantek Expert v28 Coventor SEMulator3D v9.3 rhapsody v9 Roxar RMS v2023 Petrel v2022-----Suntim28(at)gmail.com-----change to "@"-----Just for a test,anything you need-----Adobe Photoshop 2023OkMap 14.8.0 Multilingual Win64 OptiCut Pro-PP-Drillings 6.04fATIR STRAP 2021 DotSoft.ToolPac.v21.0.0.0 FlexiSIGN & PRINT v12.2KBC.PetroSIM.v7.2 Build 3137 Win64Mentor.Graphics.Calibre.2021.Linux Mentor Graphics Tessent 2019 Linux Stat-Ease Design-Expert 13.0.5.0 Win64 Materialise Magics v27TMG for NX 1847-1980 Series Update Win64 Valentin Software PVSOL premium 2021 R8 FTI.Forming.Suite.2021.0.3.31641.1.Win64 Robert McNeel & Associates Rhinoceros 7 SR9 v7.9.21222.15001 Corporate Synopsys Custom WaveView vQ-2020.03.SP1 WinAnsys.Products.2021.R2.Win64 NUMECA.FineMarine.8.2.Win64 NUMECA.FineTurbo.14.1.Win64 THESEUS-FE.v7.1.5.Win64 RokDoc 2023Cadence Clarity 2019 v19.00.000Vero Radan 2020.0.1926 x64 Fracman v8jason v12TreeaAge Pro Healthcare 2021Arcv2CAD 8 A.17 CAD2Shape 8.0 A.21 Topaz Mask AI 1.0.2 FunctionBay.Multi-Body.Dynamics.Ansys.2020.R1 CSI Xrevit 2020 CST STUDIO SUITE 2019.0.4 SP4 Update Only Win64 Lira.Soft.Lira.v10.8.R3.4.build.02.10.2019.x64 NovoBPT.v2.0.2019.1012 DNV GL Sesam GeniE 8.1-37 x64 Plexim Plecs Standalone 4.1.2 Win32_64 REFLEXW 10.2PTC Creo EMX 10.0 M040 for Creo 4.0 Win64 Keysight SystemVue 2020 ENG Win64 Siemens.Simcenter.SPEED.14.04.013.Win Siemens.Tecnomatix.RealNC.8.7.WinSiemens.NX.1888.Win64 SIMULIA.Suite.2019.HF5 Win64.&.Linux64PTC Arbortext Editor 8.0.0.0 Win64 PTC Arbortext Layout Developer (Advanced Print Publisher) 12.0.0 Win64 Softbits Flaresim 2023Edificius 3D Architectural BIM Design 12.0.5.20843 Win64Altair.Feko+WinProp.2019.2.Win64 CAMWorks.ShopFloor.2019.SP4.0.0.Win64 PTC Pro ENGINEER Manikin Population Data v2.1 M010 Siemens.Tecnomatix.Plant.Simulation.15.1.1.Win64Geometric.NestingWorks.2019.SP2.0.Win64 InnovMetric.PolyWorks.Metrology.Suite.2022 IR6.1.Win32_64 Siemens.Simcenter.TestLab.2019.1.Win32_64 FunctionBay RecurDyn V9R3 v9.3.29179.0 Win64Linux64Deep Excavation DeepEX (ex. DeepXcav) 2017 v17.0 Deep Excavation DeepFND Premium 2017 v6.0ARES Map 2019.2.1.3124.SP2 Win64 Cadence SPB v17.40.000-2019 Win64FractPro v2015Altair FluxMotor 2019.0.2 Win64 Blackmagic Design DaVinci Resolve Studio 16.1.0.55 Geometric Glovius Pro 5.1.0.476 Win32_64Cortona3D.RapidAuthor.11.1.Win64Deep.Excavation.SnailPlus.2012.v3.1.5.5Agisoft.Metashape.Pro.v1.6.0.9217.x64Engineered.Software.PIPE-FLO Professional V18.1Aquaveo Groundwater Modeling System(GMS) v10.4.6 x64 Autodesk Powermill Ultimate 2020.1 Full Win64PaleoScan v2022Cadence Allegro and OrCAD 17.20.060 Rocscience.Disp.v7.016Aquaveo Groundwater Modeling System(GMS) v10.4.6 x64Ansys.Motion.2019R3.Win64 DotSoft.MapWorks.v8.0.6.5 DRS.Technologies.Orca3D.v2.0.for.Rhino v6.15.Win64 MedCalc.v19.1.1.Win32_64 Keil C51 v9.60aKeil C166 v7.57 Keil C251 v5.60 Keil MDK-ARM 5.28a MikroC for PIC v7.2.0forward.net v3.0 2019Isograph.Availability.Workbench.v4.0 Isograph.Reliability.Workbench.v14.0 MapInfo Pro 17.0.4 x64 MEscope 2019 Visual STN VT-950 19.0.09.19 x86x64 Altair.PollEx.6.0.Win64 Andrey Shirshov Cold Balance v2.6.14.18 Win32_64 Andrey Shirshov Heat Balance v6.12.27.36 Win32_64 Andrey Shirshov Shprotification 6.8.15.22 IronCAD.Multiphysics.2019.v21.00 SeisImager v2022Tekla Structural Designer 2019i SP1 v19.1.1.42 Win64Mentor Graphics PADS Student-Pro VX.v2.6 Win32_64 SolidWorks 2023Ansys.2023Structure Studios VIP3D Suite v2.511 x64Frontline Analytic Solver 2020IronCAD Design Collaboration Suite 2019 v21.0 Update 1 SP1 Win64 PTC.Mathcad.Prime.6.0.0.0.Win64FARO As-Built for Autodesk Revit 2019.1 Win64 MEscope 2019 Visual STN VT-950 TransMagic Complete R12.22.400s Win64 XLSTAT Perpetual 2022.3.1Altair Inspire Cast 2019.3 Win64 Avenza Geographic Imager for Adobe Photoshop 6.0 Windows macOSNCG CAM 18ProfiCAD 10.3.4FARO.As-Built.AutoCAD.2019.1 LimitState.GEO.v3.5.build.22974 MDesign.2018.Win Pythagoras.CAD.GIS.v16.00.x64 Tower.Numerics.tnxFoundation.v1.0.7.8 Tower.Numerics.tnxTower(RISATower).v8.0.5.0 AVEVA Bocad 3.2.0.4 AVEVA Electrical 12.2 AVEVA Engineering 15.1 AVEVA ERM 15.1.0.0 AVEVA Everything3D 2.1.0.22 AVEVA FabTrol 4.1.SP1 AVEVA Flexman 5.2 Win32_64 AVEVA Hull & Outfitting 12.1.SP5 AVEVA Instrumentation 12.2

PBS Template (PBSTPL) – Worked Example .......................................................... 252 8.2.3 Create a PBS Text Node (PBSTXN) – Worked Example ........................................................ 255 8.2.4 Create a PBS Object Node (PBSOBN) – Worked Example .................................................... 256 8.2.5 Create a PBS Criteria Node – A Worked Example ................................................................. 263 Exercise 14 – Flexible Explorer Configuration........................................................................ 266 9 AutoNaming Engineering items ........................................................................................ 267 AutoNaming Feature ..................................................................................................................... 267 9.1.1 AutoNaming Configuration Setup – A Worked Example ......................................................... 268 9.1.2 AutoNaming Configuration Setup with Rule Definition – A Worked Example ........................ 273 9.1.3 AutoNaming Configuration with Condition based Rule – A Worked Example......................... 276 Exercise 15– AutoNaming Definition ....................................................................................... 277 10 Appendix A ...................................................................................................................... 278 Syntax for Distributed Attributes ............................................................................................. 278 Distributed Attributes and Attribute Syntax ........................................................................... 279 Pseudo Attributes Associated with Distributed Attribute Syntax ........................................ 280 11 Appendix B ...................................................................................................................... 283 Version Control Configuration (VERCON) .............................................................................. 283 Copyright © 2014 AVEVA Solutions Limited and its subsidiaries. All rights reserved. 7 www.aveva.com AVEVA Engineering (14.2) Engineering Administration (TM-3652) This page is intentionally left blank. Copyright © 2014 AVEVA Solutions Limited and its subsidiaries. All rights reserved. 8 www.aveva.com CHAPTER 1 1 Introduction This training guide has been developed for the engineering project administrative user who will be responsible for the creation, configurations and maintenance of a defined project data infrastructure (data model). The sections covered within, attempt to detail and describe all relevant steps required for structuring an engineering data model. Aim This guide aims to be a source of the administrative knowledge necessary for the administration of an AVEVA Engineering project. This includes the complete definition, setup and configuration of an appropriate engineering data structure, which will be run within the AVEVA Engineering Tags module. Objectives  Definition of a standard AVEVA Engineering data model using the new Data Modelling tool feature  Descriptions of the standard creation of project users, teams, databases and multiple databases (MDBs)  Detailed descriptions of the creation LEXICON/CONFIGURATION modules  Configuration and setup of the user workspaces within the AVEVA Engineering Tags application and setup of required elements within the Prerequisites Trainees should be familiar with the use of Admin modules

22-11-15, 10:20 PM #1 Physan DCSuite Ver 5.0 Crack download software2014F AVEVA.PID.12.1.SP2 AVEVA Everything3D v1.1 AVEVA Instrumention v12.1.1 AVEVA REVIEW v12.1Brian28#india.com---- change "#" to "@"Anything you need,You can also check here: ctrl + f3DQuickPress v6.0.1 Win64 3DQuickPress 6.0.3 Win64Altium Designer 15.0.15 Build 41991 Applied Imagery Quick Terrain Modeler v8.01 Win64Applied.Imagery.Quick.Terrain.Modeller.v8.0.4.4.Wi n32AspenONE Engineering suite v8.7 WinAutoForm^Plus_R5.2.4 AutoCAD.v2016.Win32_64Autodesk.Alias.Design.v2016.Win64 Autodesk.AutoCAD.Mechanical.v2016.Win32_64 EdgeCAM_2015_R1_SU2 Aldec Active-HDL 10.1 32bitAldec.Riviera-PRO.2015.02.76.Win32Win64Antenna Magus 5.3.0 Pro ArtiosCAD v14Bentley.Microstran.Advanced.09.20.01.35ConSteel.v9.0 CsJoint v9.0Deltares_Breakwat_3.3.0.21 CD-Adapco Star CCM+ 10.02.010-R8 CSI ETABS 2015 v15.0.0.1221 x86+x64CST Studio Suite 2015 SP1cimatron E 12.0embird v2015CorelDRAW.Graphics.Suite.X7.17.1.0.572.Win64Ergosoft TexPrint 2008 13.0.4.4163Ergosoft PosterPrint 2008 13.0.4.4163Global.Mapper.v16.1.3.b031815.Win32_64Geometric_Glovius_Pro_v4.0.0.209_WinGolden Software Didger 5.8.1326Golden.Software.Grapher.v11.4.770.x86.x64Golden.Software.MapViewer.V8.0.212Golden.Software.Strater.v4.4.1648Golden.Software.Surfer.v12.6.963.x86.x64HDL.Design.Entry.EASE.v8.2.R3.for.WinlinuxHDL Works HDL Desing Entry EASE 8.2 R2 WinLnxInsight.Numerics.Detect3D.v1.52.Win64IronCAD.Design.Collaboration.Suite.2015.v17.0.Win3 2_64Intel.Parallel.Studio.XE.2015.Update.2Jason.Geosystem.Workbench.V8w2-RFS2FlowPhase.Inc(AQUAlibrium.V3.1,GLEWpro.V1.1,VLEFla sh.V4.0)Maplesoft Maple 2015.0 Win32_64linuxMathworks Matlab R2015a Win64Metacomp CFD++ v14.1.1 x64 Mentor Graphics HyperLynx v9.1.1 Mentor.Graphics.QuestaSim.v10.4a.Win64linux64 Delcam PowerInspect 2015 SP1 OriginLab OriginPro 2015 SR2 version b9.2.272 DS DELMIA V5-6R2015 GA HELiOS v2015 x64 HiCAD v2015 x64 DS Simulia ABAQUS 6.14-3 Win/Linux PCI.Geomatica.2014.Linux64Pitney.Bowes.MapInfo.Professional.v12.5.0.311.x64Plate.n.Sheet.v4.10.16.ePlexim.Plecs.Standalone.v3.6.5 WinlinuxMACPixologic.ZBrush.v4R7.P3.WinmacMissler TopSolid 7.9Delcam PowerSHAPE 2015 R2Delcam Crispin Engineer Pro 2015 R1 SP1 Win32_64Ansys.v16.0.nCode.DesignLife.build.193.Win64.&.Lin ux64Plexim Plecs Standalone 3.6.4 WinMacLnxRAM Elements V8i 13.00.00.22RAM Structural System V8i 14.07.00.05 Win32_64Schlumberger.AquiferTest.Pro.2015.1SIEMENS Sinumerik SinuCom v7 7 Win32_64SolidWorks 2015 SP2.0 Win64 SolidWorks 2015 SP2.1 Win64Sonnet & Blink 15.54 Linux32_64SIEMENS SINUMERIK 840D TOOLBOX sw4 5 (incl. AccessMyMachine-p2p) SW 4.6 HF1Strata Design 3D CX 7.5SynaptiCAD.Product.Suite.19.01aTripos.SYBYL-X.v2.1.1.WinlinuxmacApplied Imagery Quick Terrain Modeler v8.01 USA & International Win32_64 PROKON v2.6.41 with SP Hypermill v2014Schlumberger.Pipesim.2014.1 Win64 Altium Vault 2.1.5.41756 CorelDRAW.Graphics.Suite.X7.17.1.0.572.Win64 CorelDRAW.Technical.Suite.X7.v17.4.0.887.Multiling ual.Win32_64 DP Technology ESPRIT 2014OMRON CX-ONE 4.32 with Up Vero.Visi.v21.1 Bentley AutoPIPE Vessel (Microprotol) V8i SS1 33.03.00.20 DataKit CAD Plugins 2015 Suite Win32_64 DataKit CrossManager 2015 Win3264 Delcam Crispin ShoeMaker 2015 R2 SP1 GGCad v2.1.0.29 Holophase.CIRCAD.v4.20e LinSig.v3.2.22.0 Opera-3d Modeller 13.0 Professional Edition win32 SoundCheck 7.0 CadnaA 3.72.127(32Bit) VeraCalc 6.0 LMS.Samtech.Samcef.Solvers.V16.1-02.Win64-i8 Meteonorm v7.1.3 solidThinking Evolve 2015.4848 Win64PTC.Creo.Elements.Pro.v5.0.M260.Win32_64Polar Instruments si8000 v10.01 Polar Instruments si9000 2011 v11.04 ProgeCAD 2016 Professional v16.0.2.7 Siemens FEMAP v11.2.0 with NX Nastran Win64 Synopsys CoreTools vJ-2014.12 SP1 Linux32_64 Synopsys Formality vJ-2014.09 SP3 Linux64 Synopsys IC Compiler vJ-2014.09 SP3 Linux64 Synopsys Milkyway vJ-2014.09 SP3 Linux64 Synopsys Synthesis vJ-2014(1).09 SP3 Linux64 Synopsys TetraMax vJ-2014.09 SP3 Linux64 Synopsys Embedit Integrator vJ-2014.12 SP1 Linux32_64 Synopsys Core Synthesis Tools vJ-2014.09 SP3 Linux64 Unscrambler.X(Standalone.Edition).V10.3 VariCAD 2015 v1.09 Visual Vessel Design 2015 Winsev v6.3 Wolfram SystemModeler 4.0.1Silvaco TCAD 2014.00 Win32Silvaco AMS 2014Schlumberger Techlog 2013.3 Win64 Khách viếng thăm hãy cùng czcsas5 xây dựng diễn đàn CLBGAMESVN vững mạnh nhé!